Discover the perfect balance of strength, clarity, and waterproofing with these bronze 10 mm twinwall polycarbonate sheets.
Designed for a wide range of roofing and glazing applications, these sheets offer a lightweight yet robust solution that allows ample daylight to filter through.
Key Features
Installation Tips:
Make adequate allowance for thermal movement, nominally 3.5mm per metre. Holes drilled for fixings must be oversized.
Sheet lengths must be limited to ensure there is no excessive movement at the end laps.
In order to maintain this product in good condition it should be cleaned periodically using suitable detergent cleaning agents. Do not use solvent cleaners. Do not scrub with brushes or sharp implements. Avoid cleaning in hot sun or high temperatures.
FAQs
How much fall is required?
Regarding the product's pitch, there is no specific minimum requirement. However, it's worth noting that a steeper pitch is more effective in ensuring rainwater runoff. This not only enhances waterproofing but also minimizes the risk of debris like dirt and leaves accumulating on the roof. Typically, a minimum pitch of 10 degrees is considered standard best practice, though in certain situations, a lower pitch may suffice.
What does the maximum distance need to be between the joists supporting the sheets for the 10mm and 16m?
As a general guideline, when working with 10mm polycarbonate sheets, we typically recommend widths ranging from 600mm to 700mm. For 16mm sheets, a width range of 600mm to 950mm is commonly recommended.
However, it's essential to consider several factors specific to your project, including your geographical location, exposure to wind, and the structural integrity of your setup. Please ensure that the chosen widths align with the requirements of your unique project. In some cases, additional support in the form of cross purlins may also be necessary for added stability.
Will the 10 mm polycarbonate twinwall sheets span rafters at 750 mm centres?
The suitability of rafter centers for these 10mm polycarbonate sheets depends on various factors such as your geographical location, exposure to wind, and the structural aspects of your project. Generally, these sheets are often employed with rafter centers ranging from 500mm to 750mm.
On the other hand, the 16mm polycarbonate sheets are a preferred choice for those seeking enhanced strength and durability. To bolster structural support, you have the option of incorporating cross purlins if deemed necessary for your specific requirements.
Is this 10mm Polycarbonate Sheet suitable for DIY projects?
Certainly! This particular sheet enjoys popularity among both DIY enthusiasts and professional contractors, thanks to its straightforward installation process and adaptable nature.
Can I use this sheet for greenhouse glazing?
Indeed, this sheet stands as an exceptional choice for greenhouse glazing, delivering ideal light transmission and thermal insulation to foster robust plant growth.
U-Value Table
- 10mm Twinwall U-Value – 3.2W/m2K
- 10mm Twinwall Opal Light Transmission – 40%
- Fire Resistance Standards – BS 476-7 Class 1Y
Versatile Applications:
- Canopies and Covered Walkways
- Swimming Pool Covers
- Curved Rooflights
- Carports and Conservatories
- Equestrian areas
- Children's Play areas
- Cold Frames and Horticultural uses
- Shelters
- Greenhouses
- BBQ Shelters
- Bike Shelters
- Pergolas
- Vertical Glazing
- Displays
- Industrial Rooflights
- Signage
- Insulation